Products Description

The New electric fire truck refers to a special fire fighting vehicle driven by an advanced electric powertrain. Compared with traditional oil-powered fire engines, this new type of fire engine shows more environmentally friendly, efficient and quiet characteristics. They generally use cutting-edge battery technology and electric drive technology, aiming to achieve zero emissions, low noise, high energy efficiency of excellent operating performance, thus playing a vital role in modern firefighting work.one. Preparation before operation of New Electric Fire Truck
1. Check the lubricating oil level in the bearing box and primer pump, if insufficient, it should be supplemented.
2. Close all drain taps and valves.
Two.New Electric Fire Truck to divert water, fill
1. When using the water in the pond, take off the suction pipe, connect one end with the pump suction port, connect the other end with the water filter and put it into the pond, close the butterfly valve, open the pilot valve, you can fill the water tank.
2. When using water from the fire hydrant, the water belt connects the fire hydrant to the water injection interface outside the tank, and the water is injected directly into the tank.
Three. Fire truck out of the water
When the New Electric Fire Truck uses the water in the water tank, open the rear inlet butterfly valve and start the fire pump, perform the following operations:
1. Low pressure discharge
After the fire pump works, open the low pressure outlet ball valve to achieve low pressure outlet
2. shotcrete
When working at low pressure, close the low pressure outlet ball valve and open the gun ball valve to realize the fire extinguishing of the gun outlet.