features:

1. Body design: 5 Seats Security Patrol Car adopts closed compartment design to provide a comfortable riding environment. The seats in the carriage are designed with non-slip design and can accommodate 5 people at the same time. The locomotive is equipped with searchlights and alarms to improve visibility and deterrence on night patrol.

2. Power system: The use of efficient motor drive, to provide stable and durable endurance. The maximum driving speed can reach 30 km/h to meet the needs of urban patrol.

3. Monitoring system: there are surveillance cameras installed in the carriage, which can transmit video signals in real time, which is convenient for security personnel to remotely monitor the situation in and around the car.

4. Communication equipment: 5 Seats Security Patrol Car body is equipped with wireless microphone and loudspeaker, convenient for security personnel to communicate and shout at any time.

5. Vehicle management: Equipped with intelligent key management system, remote control and vehicle positioning functions can be realized to facilitate vehicle scheduling and management.

Product Introduction：

1. Check the condition of the vehicle: Before driving the 5 Seats Security Patrol Car, first check whether the amount of oil, water tank, tires, etc. of the vehicle is normal to ensure that the vehicle is in good working condition.

2. Turn on the power: Turn on the power of the vehicle through the key or one-click start button, and wait for the vehicle self-test to be completed.

3. Check the monitoring equipment: 5 Seats Security Patrol Car is usually equipped with cameras and monitors, you need to check whether the camera is working properly, the monitor is clear and adjusted to the appropriate position.

4. Start operation: After confirming the safety around the vehicle, hang the gear, release the handbrake, gently step on the accelerator, and start slowly. After starting, adjust the speed and direction as needed.

5. Patrol route planning: Before patrolling, the patrol route should be planned first to ensure that the patrol is carried out in accordance with the scheduled route. At the same time, patrol routes can be flexibly adjusted according to the actual situation.

6. Parking operation: When you need to stop, you should first find a suitable parking position, and then slowly slow down, brake, handbrake, and stop the vehicle.

7. Turn off the power: After parking, turn off the power of the vehicle and lock the door to ensure the safety of the vehicle.

The above are the basic operation steps of 5 Seats Security Patrol Car, the specific operation may vary depending on the model and configuration. In actual operation, it is recommended to refer to the vehicle's user manual or consult a professional to ensure the safe and correct operation of the security patrol car.

Product Pictures：

Product Specification:

Vehicle type	Double row seat	Triple seat	Double row of 5 seats with cargo boxes
Size MM	3150-1650-1950	3950-1650-1950	4000-1650-1950
Rated occupant	5 people	8 people	5 people carry a ton
Vehicle mass	850kg	950kg	950kg
Body material	Full bearing iron shell
Battery voltage	220v
Tyre specification	155/65R13
Driving mode	Electric rear drive
Brake type	Front disc and back drum
Top speed	40km/h
Rated voltage	60v
Range	About 80-100 km	About 90-120 km	About 90-120 km
Battery type	Maintenance-free battery
Number of batteries	5
Motor power	4000w
Closed door	Can be installed

Product details pictures:

Sightseeing patrol experience airports, large amusement parks, factories, campuses, urban pedestrian streets, ports, scenic spots and other regional mobility scooters dedicated to environmental protection electric passenger vehicles.