Maintenance Methods For Electric Classic Cars

battery
1. Perform a balancing charge every three months to six months, and charge for 1-2 hours each time;
2. Check the water level;
3. It must be charged when the voltmeter indicates the yellow area or when the battery meter indicates the second grid. Over-discharge is strictly prohibited. Keeping the battery at a state of charge above 70% will help extend the battery life;
4. Cover the exhaust cap of the electric classic car tightly before charging;
5. Familiarize yourself with and comply with the instruction manual issued by the charger manufacturer;
6. Do not overcharge. Overcharging will result in the production of a large amount of gas (water consumption), battery heating and aging;
7. Don't be undercharged. Undercharging can cause battery passivation;
8. Do not charge frozen batteries;
9. Avoid charging classic electric cars at temperatures above 120℉ (49℃);
10. Electric classic cars should be charged after use every day;
11. Lead-acid batteries have no memory effect, so they do not need to be fully discharged before charging;
12. Keep the charging place well ventilated and keep away from sparks or flames;
13. Confirm that the electric classic car charger is faultless (the voltage setting is correct).
Brake system
1. When the electric classic handbrake does not work, you can adjust the adjusting bolt at the joint of the front and rear handbrake lines;
2. Regularly check the oil level of the electric classic car brake oil tank. When the oil level in the oil tank is less than 1/3, you must refill it immediately;
3. If the brakes are soft or ineffective, it is necessary to adjust the brake clearance and discharge the air in the brake pipeline in time;
4. Brake deviation can adjust the gap between the brake shoe and the brake drum in the brake;
5. Regularly check the status of the brake pipes and the fixed points of the frame of the electric classic car, and take protective measures in time if it is found that the brake pipes have fallen off or there is friction between the pipes and the frame;
6. Electric classic cars need to be inspected frequently to check whether the connection device of the brake line is loose or worn. To adjust the brakes of the electric car, you can directly adjust the thread on the brake hook connected to the brake pedal.